2026-05-25 • Youmarell
BlogRadiant heating systems, whole-home comfort and ‘Green Homes’: how design is changing in light of EPBD IV, CAM and new technical standards
The construction sector currently stands at a historical crossroads. It is no longer just about "building well" or "insulating a bit better," but about orchestrating a radical transformation of our building stock to answer a call coming directly from Brussels—one that profoundly impacts the quality of our daily lives.
The entry into force of the EPBD IV Directive (known as "Green Homes"), the update of the Construction CAM (Minimum Environmental Criteria), and the evolution of technical standards are rewriting the rules of the game. In this scenario, low-inertia radiant systems are no longer a niche choice but emerge as the "enabling" technology par excellence: the necessary bridge between extreme energy efficiency and a living comfort that finally puts the human being at the center.
To understand where we are headed, we must look at the "golden triangle" of European directives that make up the Fit for 55 package. As highlighted by architect Giovanni Murano (ENEA) during the recent conference promoted by the Q-RAD Consortium and ANIT, a precise synergy exists between these tools: EED III (Efficiency) establishes how much we must save in absolute terms, EPBD IV (Performance) indicates how we must transform buildings in terms of envelope and systems, and RED III (Renewables) defines which energy we must use to power them.
The goal is ambitious: climate neutrality by 2050.
However, the intermediate milestones are tight. For the residential sector, Italy will need to reduce average primary energy consumption by 16% by 2030 and by 20-22% by 2035. The challenge is titanic, considering that 75% of the EU building stock is currently inefficient. In Italy, with approximately 35.3 million residential units, the task of prioritizing the renovation of the 43% of worst-performing buildings will require not just investment, but a completely new design vision. This is where the ZEB (Zero Emission Building) standard comes into play: a building that not only consumes very little but emits zero CO₂ on-site from fossil fuels.
If the gas boiler is destined for "sunset boulevard," the heat pump is the new protagonist. However, a heat pump performs best when working at low flow temperatures. This is where radiant systems reveal their strategic superiority. As highlighted by Eng. Matteo Bilardo (Turin Polytechnic), the radiant system is intrinsically "EPBD-ready." Unlike traditional radiators, which heat primarily by convection, radiant systems work through radiation. This maximizes heat pump efficiency by operating with water temperatures close to those of the environment, causing the COP (Coefficient of Performance) to skyrocket.
Furthermore, it facilitates integration with solar thermal and photovoltaic systems and allows the building structure itself to become a thermal flywheel for demand response strategies.
In renovations, the main constraint is often thickness. Low-inertia radiant systems—such as dry, milled, or low-thickness systems—solve the technical problem while offering a responsiveness unknown to traditional systems. While an old radiant system took hours to reach steady-state, new low-inertia solutions respond very quickly, adapting perfectly to modern lifestyles and variable thermal loads. Designing today also means looking at IEQ (Indoor Environmental Quality).
Standards UNI EN ISO 7730:2026 and UNI EN 16798-1 are the compasses for designers, measuring comfort through precise indices such as PMV (Predicted Mean Vote) and PPD (Predicted Percentage Dissatisfied).
To comply with the new 2025 Construction CAM, projects must guarantee Comfort Category B. Radiant systems facilitate this because they act on the mean radiant temperature, allowing for perceived well-being even with slightly lower air temperatures and eliminating localized discomforts such as drafts or excessive radiant asymmetries. It is also a mistake to think of the radiant system only as a "heat emitter"; in reality, it is an integral part of the floor slab package.
New CAM and current regulations place very strict requirements on building acoustics, making the integration between thermal insulation and impact sound reduction fundamental. A low-inertia radiant system must be correctly designed to avoid becoming an acoustic bridge, requiring integrated cooperation between thermal and acoustic engineers.
Beyond the historic UNI EN 1264 and UNI EN ISO 11855, the true revolution is represented by specific national draft standards for low-inertia systems and for laying delicate flooring such as wood. The EED III Directive assigns the public sector a leading role, requiring a reduction in final consumption by 1.
9% annually and the renovation of 3% of public building surface area each year. Italy has chosen to focus on Renovation Passports, which will accompany buildings toward the NZEB standard by 2040. For designers in the public sector, radiant systems become an almost mandatory step to satisfy efficiency, renewable use, and citizen well-being.
The energy transition is an opportunity to elevate construction quality. Low-inertia radiant systems are smart, digital-ready for BACS systems and the Smart Readiness Indicator, and environmentally friendly. The future of design will see the system as an integrated environmental comfort solution where the envelope protects, the radiant system climatizes, the VMC purifies the air, and automation optimizes energy flows.
We have moved from the era of "burning" to heat to the era of "exchanging" heat intelligently, and in this revolution, radiant technology is the beating heart.
Il settore dell’edilizia si trova oggi davanti a un bivio storico. Non si tratta più solo di "costruire bene" o di "isolare un po' meglio", ma di orchestrare una trasformazione radicale del nostro patrimonio immobiliare per rispondere a una chiamata che arriva direttamente da Bruxelles, ma che impatta profondamente sulla qualità della nostra vita quotidiana.
L’entrata in vigore della Direttiva EPBD IV (nota come "Case Green"), l'aggiornamento dei CAM Edilizia (Criteri Ambientali Minimi) e l'evoluzione delle norme tecniche stanno riscrivendo le regole del gioco. In questo scenario, i sistemi radianti a bassa inerzia non sono più una scelta di nicchia, ma emergono come la tecnologia "abilitante" per eccellenza: il ponte necessario tra l’efficienza energetica estrema e un comfort abitativo che metta finalmente l'essere umano al centro.
Per comprendere dove stiamo andando, occorre guardare al "triangolo d'oro" delle direttive europee che compongono il pacchetto Fit for 55. Come sottolineato dall’architetto Giovanni Murano (ENEA) durante il recente convegno promosso da Consorzio Q-RAD e ANIT, esiste una sinergia precisa tra questi strumenti: EED III (Efficiency): stabilisce quanto dobbiamo risparmiare in termini assoluti; EPBD IV (Performance): indica come dobbiamo trasformare gli edifici (l'involucro e gli impianti); RED III (Renewables): definisce con quale energia dobbiamo alimentarli.
Il traguardo è ambizioso: la neutralità climatica entro il 2050. Ma le tappe intermedie sono serrate. Per il settore residenziale, l'Italia dovrà ridurre il consumo medio di energia primaria del 16% entro il 2030 e del 20-22% entro il 2035. La sfida è titanica se pensiamo che il 75% del parco immobiliare UE è attualmente inefficiente.
In Italia, con circa 35,3 milioni di unità immobiliari residenziali, il compito di riqualificare prioritariamente quel 43% di edifici con le prestazioni peggiori richiederà non solo investimenti, ma una visione progettuale completamente nuova. Qui entra in gioco lo standard ZEB (Zero Emission Building): un edificio che non solo consuma pochissimo, ma che non emette CO₂ in situ da combustibili fossili.
Se la caldaia a gas è destinata al viale del tramonto, la pompa di calore è la nuova protagonista. Tuttavia, una pompa di calore dà il meglio di sé quando lavora a basse temperature di mandata. È qui che i sistemi radianti rivelano la loro superiorità strategica.
Come evidenziato dall’ing. Matteo Bilardo (Politecnico di Torino), il sistema radiante è intrinsecamente "EPBD-ready". A differenza dei radiatori tradizionali, che riscaldano prevalentemente per convezione (muovendo aria e polvere), il radiante lavora per irraggiamento. Questo permette di massimizzare il rendimento delle pompe di calore: Operando con temperature dell'acqua vicine a quelle dell'ambiente, il COP (Coefficient of Performance) delle macchine sale vertiginosamente; sfruttare le rinnovabili: La bassa temperatura facilita l'integrazione con il solare termico e fotovoltaico; flessibilità e accumulo: La struttura stessa dell'edificio diventa un volano termico, permettendo strategie di demand response (usare l'energia quando costa meno o quando il sole splende, "caricando" termicamente il massetto).
Nelle ristrutturazioni, il vincolo principale è spesso lo spessore. I sistemi radianti a bassa inerzia (sistemi a secco, fresati o a basso spessore) risolvono il problema tecnico offrendo al contempo una reattività sconosciuta ai sistemi tradizionali. Se un vecchio impianto radiante impiegava ore per andare a regime, le nuove soluzioni a bassa inerzia rispondono in tempi rapidissimi, adattandosi perfettamente agli stili di vita moderni e ai carichi termici variabili degli edifici altamente isolati. Progettare oggi significa guardare alla IEQ (Indoor Environmental Quality). Non basta che l'edificio non disperda calore; deve essere un luogo sano e confortevole. La norma UNI EN ISO 7730:2026 e la UNI EN 16798-1 sono le bussole per i progettisti. Il comfort non è un concetto astratto, ma si misura attraverso indici precisi come il PMV (Predicted Mean Vote) e il PPD (Predicted Percentage Dissatisfied).
Per rispettare i nuovi CAM Edilizia 2025, i progetti devono garantire la Categoria B di comfort. I sistemi radianti facilitano il raggiungimento di questi obiettivi perché agiscono sulla temperatura media radiante, permettendo di percepire benessere anche con temperature dell'aria leggermente inferiori (risparmiando energia) e annullando i fastidi localizzati come le correnti d'aria o le asimmetrie radianti eccessive.
Un errore comune è pensare al sistema radiante solo come a un "emettitore di calore". In realtà, esso è parte integrante del pacchetto solaio. I nuovi CAM e le normative vigenti pongono requisiti severissimi sull'acustica edilizia.
L'integrazione tra isolamento termico e abbattimento acustico del calpestio è fondamentale. Un sistema radiante a bassa inerzia, se non correttamente progettato dal punto di vista della stratigrafia (scelta del materassino resiliente, giunti perimetrali, massa del massetto autolivellante), rischia di diventare un ponte acustico. La progettazione deve quindi essere integrata: il termotecnico e l'acustico devono lavorare sullo stesso disegno tecnico per evitare che il benessere termico comprometta il silenzio dell'abitazione.
Oltre alle storiche UNI EN 1264 e UNI EN ISO 11855, la vera rivoluzione è rappresentata dai progetti di norma nazionali specifici per i sistemi a bassa inerzia e per la posa di pavimentazioni delicate come il legno su questi sistemi.
La Direttiva EED III assegna al settore pubblico un compito di guida: ridurre i consumi finali dell'1,9% annuo e ristrutturare il 3% della superficie degli edifici pubblici ogni anno. L'Italia ha scelto una via strategica: invece di interventi a pioggia, punterà sui Passaporti di Ristrutturazione.
Questi documenti accompagneranno gli edifici rappresentativi in un percorso a tappe verso lo standard NZEB entro il 2040. Per i progettisti che operano nel pubblico, l'adozione di sistemi radianti diventa quasi un passaggio obbligato per soddisfare contemporaneamente i requisiti di efficienza, l'uso di rinnovabili e il benessere dei cittadini (pensiamo a scuole e uffici pubblici).
La transizione energetica non è una minaccia, ma un'opportunità per elevare la qualità del costruire. I sistemi radianti a bassa inerzia incarnano perfettamente questo spirito: sono intelligenti, pronti per il digitale (grazie all'integrazione con i sistemi BACS e lo Smart Readiness Indicator), e rispettosi dell'ambiente.
Il futuro della progettazione non vedrà più "l'impianto" come un elemento aggiunto a posteriori, ma come un sistema integrato di comfort ambientale. In questo sistema, l'involucro protegge, il radiante climatizza con dolcezza, la VMC purifica l'aria e l'automazione ottimizza i flussi energetici.
Siamo passati dall'era del "bruciare" per scaldare all'era dello "scambiare" calore in modo intelligente. E in questa rivoluzione, il radiante è il cuore pulsante.
Recommended
2026-05-25 • Youmarell
NewsHow construction can contribute to mitigating the climate crisis
2026-05-25 • Youmarell
ArticleHeat pumps, BACS and solar systems: what the 2025 Minimum Requirements Ministerial Decree stipulates
2026-05-25 • Youmarell
Article