LO YOUMARELLO
2026-05-25

Heat pumps, BACS and solar systems: what the 2025 Minimum Requirements Ministerial Decree stipulates

Youmarell

The Italian construction landscape is preparing for one of its most profound transformations in the last decade. With the publication of the Ministerial Decree of October 28, 2025, in the Official Gazette last December, the sector has received a shockwave that goes far beyond a simple update of coefficients or numerical tables. We are witnessing the full transposition of the EPBD III Directive, also known as the Green Homes Directive, which shifts the axis of energy design toward a holistic and deeply technological vision. This decree, which will officially enter into force on June 3, 2026, does not merely correct the course of the previous 2015 Decree, but fundamentally rewrites the rules of engagement for designers, builders, and component manufacturers. The goal is clear: to transform the building from a passive assembly of envelope and systems into an intelligent organism capable of self-regulation and maximizing the contribution of renewable sources. For those operating daily in the sector, the change is tangible and requires a cultural leap before a technical one, as pillars that seemed consolidated—such as the point-based evaluation of generator efficiency or the discretionary management of automation in commercial buildings—are being called into question.One of the most disruptive aspects of the 2025 Decree concerns the world of heat pumps. For years, designers have based their checks on $COP$ (Coefficient of Performance) and $EER$ (Energy Efficiency Ratio) calculated at specific operating points. These indices, while useful as instantaneous references, never provided a faithful photograph of the machine's actual behavior during the entire heating or cooling season. The new decree makes a bold and necessary choice: it definitively eliminates the national tables that set minimum limits for $COP$ and $EER$, aligning itself entirely with European Ecodesign regulations. From June 2026, the compass for choosing a heat pump will be represented exclusively by seasonal energy performance, expressed through the $SCOP$ and the seasonal space heating efficiency $\eta_s$. This transition is not a mere bureaucratic simplification but a call to responsibility for both the manufacturer and the designer. Performance must be guaranteed for the "average" climate zone, according to the UNI EN 14825 standard, ensuring that the machine is efficient not only in the laboratory but also in real annual operating conditions. This paradigm shift encourages the adoption of more sophisticated inverter technologies and pushes the market toward higher quality products, eliminating the regulatory "gray area" that allowed the installation of less performing machines that were formally compliant with old point-based limits.In parallel with this evolution of seasonal performance, the legislator has finally cast a spotlight on hybrid systems, a type of plant that until now had navigated troubled waters due to a specific regulatory vacuum. The 2025 Decree introduces, for the first time, an organic discipline for systems that combine a heat pump and a condensing boiler. Whether these are factory-made solutions—assembled and tested directly in the factory—or bivalent systems configured on-site, the regulation recognizes their design dignity and sets their requirements. This novelty blends harmoniously with the guidelines of the Conto Termico 3.0, creating a coherent regulatory ecosystem that makes life easier for the technician responsible for drafting the Technical Report. Multi-generator management is no longer left to the interpretation of the individual but must follow precise integration criteria. Furthermore, the decree breaks down the $12\text{ kW}$ thermal power limit that previously served as a watershed for the application of certain requirements. Now, every cooling machine or heat pump, regardless of its size, must comply with the requirements of Directive 2009/125/EC and Regulation 2017/1369/EU. It is a strong signal: efficiency is not a matter of size, but a universal obligation for every energy-consuming component.No less significant is the tightening of rules on thermoregulation. The decree establishes that the installation of a new heat pump generator, or a solar thermal system intended for heating integration, brings with it the obligation to equip all heating elements with low thermal inertia thermostatic valves. This prescription aims to optimize heat distribution within the rooms, avoiding waste and ensuring that the high efficiency of the generator is not thwarted by approximate emission management. There are, of course, exemptions linked to objective technical impediments or the presence of equivalent thermoregulation systems already in operation, but the message is unequivocal: the system must be controlled in a capillary manner, room by room. This attention to detail is also reflected in the obligation to install automatic temperature control devices for each individual room whenever the generator is replaced, provided that the intervention has a simple payback period of less than six years. This criterion of economic convenience becomes a cornerstone for many of the design choices imposed by the new decree, requiring the professional to possess not only technical skills but also a solid capacity for financial analysis.Moving to the theme of automation, the 2025 Decree elevates BACS (Building Automation and Control Systems) from a desirable optional to a mandatory requirement for a large slice of the non-residential market. The critical threshold is set at $290\text{ kW}$ of nominal thermal power. If a commercial building exceeds this value, the installation of a system of at least Class B, according to the UNI EN ISO 52120-1 standard, becomes imperative. While the 2015 Decree limited this obligation to new constructions and major first-level renovations, the new decree extends the scope to second-level renovations and even simple energy requalifications, provided the economic analysis demonstrates a payback period of less than six years. It is a silent but profound revolution: Class B is not a simple evolved thermostat, but a complex system that provides for bidirectional communication between field devices and a central supervisor, integrating the monitoring of energy consumption. In a Class B system, regulation is no longer isolated but interconnected, allowing the supervisor to orchestrate the operation of heating, cooling, ventilation, and lighting based on actual occupancy needs and external climatic conditions.To understand what it concretely means to design in Class B, one must look at the minimum functions required. It is no longer enough for sensors to read data; the data must travel to a central brain that can archive and use it for dynamic optimization. We are talking about individual automatic regulation for each room, airflow control based on air quality itself ($CO_2$ and $VOC$), and lighting systems that react to the presence of people and the availability of natural light. One of the most interesting innovations introduced by the reference to the 52120-1 standard is the obligation of dynamic balancing of hydronic systems. This function ensures that each terminal receives the exact amount of fluid necessary, regardless of load fluctuations in the rest of the building, eliminating annoying noises in the pipes and, above all, drastically reducing the work of the circulation pumps. The calculation of the simple payback time for the installation of these systems must be strictly attached to the Technical Report, becoming an integral part of the compliance of the work and an element of protection for the client, who receives tangible proof of the added value of the technological investment.Finally, the chapter on renewable sources is clarified and locked down to avoid the creative interpretations that in the past slowed down the ecological transition. The 2025 Decree specifies with extreme precision how the coverage of FER (Renewable Energy Sources) quotas should be calculated. In the presence of centralized systems, verification occurs for the entire building, while for autonomous systems, each individual real estate unit must demonstrate its own compliance. But the turning point lies in the prohibition of satisfying the thermal renewable energy quota exclusively through electricity produced by photovoltaic panels to power heat pumps. The legislator asks for integration: photovoltaics are fundamental, but they must be supported by a direct thermal renewable source, such as solar thermal or biomass, where technically possible. The goal is to prevent the building from depending on a single form of renewable energy, instead promoting a technological mix that guarantees resilience and a real reduction in $CO_2$ emissions. The minimum power of the photovoltaic system is also recalibrated, pushing toward an architectural integration that is not only functional but becomes an integral part of the modern building's plant configuration.In this new scenario, the figure of the designer evolves into that of a systems integrator. It is no longer possible to think of the boiler or heat pump as objects isolated from the envelope or the control system. The Technical Report and the Energy Performance Certificate become dynamic documents, reflecting a design that takes into account time, costs, and operational management. The 2025 Decree challenges us to build better, to think smarter, and to deliver buildings to end-users that are truly capable of facing the energy challenges of the coming decades. The transitional phase has already begun, and those who can master these new rules now, transforming obligations into efficiency opportunities, will lead the construction market of tomorrow.

Recommended