LO YOUMARELLO
2026-05-25

Difficult sites

Youmarell

‎

There are different types of problematic soils for supporting building foundations. The most common are listed below and their characteristics are described. Fill Fill is material that can have very different characteristics and origins. It may be natural soil excavated and deposited in another area (it may have undergone a screening and compaction process). It may be partially or totally composed of rubble, topsoil and other debris. It is usually insufficiently compacted soil with the presence of degradable material. Its geotechnical characteristics are generally unsuitable for foundation support. As a consequence of its presence, excessive settlement usually occurs, which can be differential if the heterogeneity of the material produces it. Expansive clays First of all, it should be made clear that not all expansive materials are clays and that the term ‘expansive’ is improper, it being more correct to use the term ‘fluctuating’, since soils with these characteristics undergo volume changes, which may be small or very large, as the soil moisture changes. When soil moisture increases, the soil gains volume (swelling), which can - in extreme cases - produce upward thrust in structures. Usually the opposite phenomenon occurs, i.e. collapse due to drying of the soil. The loss of volume in the surface layers usually results in the detachment, rupture and collapse of foundations. Cracks and unevenness ensue. The phenomenon tends to affect the perimeter of buildings more and follows the winter-summer cycles. This phenomenon starts to act from the moment of construction and does not cease, affecting 2 m of top soil. From this depth onwards, the soil maintains a constant humidity despite climatic variations. The existence of fluctuating soil can be verified through laboratory tests, such as Attemberg limits or oedometric tests. To avoid this phenomenon, the foundation must be supported at a greater depth. Normally, the presence of a foundation is sufficient to avoid the consequences. Collapsible soils These are soils supporting the foundation that undergo a sudden increase in humidity (saturation), resulting in abrupt and spontaneous settlement, the greater the pressure transmitted by the structure and the lower the humidity at the moment of saturation (flooding). It follows that this phenomenon does not occur in soils below the water table. The best way to prevent this problem is to avoid soil flooding, but this may not be possible, for example in areas where there are fluctuations in the water table. Karstified or internally eroded soils Some materials, especially calcareous and chalky ones, are water-soluble and can give rise to karst phenomena, i.e. chemical alteration due to the circulation of water. This often leads to the presence of caves, chasms and other karst forms. The presence of cavities in the ground beneath a building can lead to the collapse of the foundation. This problem can be addressed by filling in the cavity or with hydraulically driven steel micropiles, if soil characteristics permit. Poorly compacted or inconsistent natural soils Some natural soils are soft or loose, usually because they are recent soils that have not had a history of consolidation by burial. Examples of these soils are alluvial deposits, which are linked to river channels, slope erosion deposits (colluvial) or mixed deposits, where water flows and soil slope converge.

Recommended